Micro-Infusion
Micro-Infusion Filter
Product Details
Materials of Construction
Filter Material: 0.22 micron, Cellulose Acetate Membrane
Vent Media: 0.02 micron, ePTFE Membrane
Housing Material: Acrylic
Biological Safety: USP Class VI Materials
Sterilization Compatibility: Gamma Radiation, EtO
Connections
Type: Tubing
Inlet: 0.170"od, (0.090"id w/taper lead in) Female & Male Combination
Outlet: 0.170"od, (0.090"id w/taper lead in) Female & Male Combination
Design
Overall Dimensions: 0.850" dia x 1.51" total length
Effective Filtration Area: 1.7 cm2
Performance Data
Bubble point: 40.0 psig
Minimum flow rate: >3 mL/min
Maximum Operating Pressure: 45.0 psi
Pressure rating: 45.0 psi
Prime time: 1.2 seconds
Bacterial retention: 0.22 micron Bacterial Retention
Filtration capacity: >500 mL with normal IV solution
Hold up volume: <0.3 mL
Usability: Disposable
Packaging
Standard Pack: 4,000 pieces/carton (bulk, non-sterile)
Specifications are for pre-sterilized products and are subject to change without notice. Results in specific applications may vary. Filtertek recommends that end user confirm fitness in specific applications.
Product Drawings
Drawings are not available for this product.
Warranty
Product Warranty
Filtertek takes the quality and performance of our products very seriously. Every effort is made to provide our customers with a product of low variability which consistently meets specification in every respect. Filtertek strives to continually improve the quality of our products and cannot always ensure that our literature and published data is up-to-date. Please contact your Filtertek account manager to discuss your application and a suitable product in detail before making a purchase.Our specifications are for pre-sterilized products and are subject to change without notice. Customers are encouraged to fully test any product in its end use application to ensure suitability.
Filtertek Inc. products are warranted against defects in materials and workmanship for a period of 90 days after shipment. Filtertek Inc. will replace or refund the invoice price for any item that proves to be defective during this time period. These products are not warranted, nor does Filtertek Inc. assume liability for misuse. No other warranty or representation is implied or expressed by Filtertek Inc. for its products with respect to merchantability, fitness for a particular purpose or any other matter. Filtertek Inc. shall not under any circumstances be liable for any incidental, consequential, or compensatory damage arising from the use of, or in conjunction with its products. The maximum liability which can be assumed by Filtertek Inc. for breach of warranty shall be the invoice price of the product.
Technical Literature
Technical literature is not available for this product.
